Made in china auto body collision repair car measuring system car bench frame machine

Made in china auto body collision repair car measuring system car bench frame machine

Structural characteristics of beam correction instrument

1. The platform is wide, the panel is formed by large-scale CNC blanking at one time, the cut is smooth, and there is no thermal deformation.

2. All Parts are shot blasted to eliminate welding stress, increase surface strength, and high paint adhesion.

3. The platform adopts the standard steel plate which is welded by carbon dioxide gas shielded welding. It has high strength, good rigidity and many process holes, which can facilitate the arrangement of anchoring mechanisms.

4. 360-degree operation of the tower column, free and flexible, the cylinder works vertically, the action is strong and accurate.

Precautions for using beam correction instrument

1. When using the car beam calibration instrument, pay full attention to matters. Otherwise, it may cause calibration failure or damage the calibration equipment.

2. Before carrying out the traction correction, the internal parts of the car body should be protected, such as seats, instruments, car cushions, etc. Remove the outer parts of the body, and use cotton cloth or protect the body to prevent scratches. If the paint surface is scratched, it needs to be repaired to prevent corrosion.

3. After the car body calibration and repair is completed with the car beam correction instrument, the post-M inspection should be done in time. The inspection is carried out in two situations: when the fixing device is not used for repair, the post-M measurement and inspection should be done, and the same as the body and frame Compare the size manual to determine whether it meets the requirements of body calibration. Repairs on the fixed device do not need to be measured, just judge the body control point and the fixed device to match.

FAQ                                                                                                           

1: What kind terms of payment can be accepted?

A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted

2: What certificates are available in Machinery?

A: For the certificate, we have CE, ISO,EPA(USA),CCC

3: What about the delivery time?

A: 7-20 days after receiving the deposit.

4: What about the warranty time?

A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?

A: The MOQ is 1 pcs

6.What about the service?

1). Quick response to every inquiry.

2). Professtional and detailed answer to any of customer's questions.

3). Strict QC and in time delivery.

4). Offer all relative material for customer to know and better use the machine.

5). Periodically after service follow up, offer any necessary support if needed.

6).For the new machine, within determined limits, the manufacture guarantees warranty for a period of 12 months after bought or 2000 working hours(whichever comes first).

7).The warranty includes repairation or replace the parts for free which were proved to be defective in origin by the technical department of the manufacture.

8).The repairation or replacement for the parts should not exceed the warranty period.

9).The warranty is valid on the condition of all the terms listed in the contract was observed.