Walk-up cold spray automatic cold paint and thermoplastic road marking machines price

Walk-up cold spray automatic cold paint and thermoplastic road marking machines price

Product use of hot melt marking machine:

The multifunctional hot-melt marking machine is a new type of marking machine. The marking machine integrates melting material and marking. It can independently complete various linear markings. It is suitable for parking spaces with small engineering volume and scattered complexities. , Field, community, warehouse, dock construction, etc. are more practical.

Steps to use the hot melt marking machine:

It is to check whether all Parts of the car body are in normal state before construction, adjust the height difference between the sealing knife and the floor knife and the ground according to the marking thickness requirements, add glass beads to the glass bead box, ignite the preheating marking machine, and add paint . Position and lower the pointer, aiming at the center of the reference line. When the temperature in the insulation kettle reaches 180°C-220°C, feed into the marking hopper. When the paint in the hopper is about 25mm away from the surface of the hopper, close the discharge door and stop feeding. Turn on the glass bead spreader to scribe and add materials in time during the scribing process. Reset and clean up at the end of construction.

After marking, the equipment should be cleaned in time, especially the cleaning of the marking bucket. In addition, the marking bucket should not touch the ground excessively during use. Frequently check whether the liquefied gas pipelines, valves, and screws of various parts are loose, and whether there is gas leakage in gas tanks, stoves, and pipelines, pay attention to use. After cleaning, apply a little lubricating oil to the marking machine and clutch. In addition, the equipment needs regular maintenance.

Melting tank: Double-layer heat preservation and heating tank, which can be disassembled manually without tools, capacity: 100kg, plug-in mixing device. 2. Glass bead box: 10kg

Spreader: Synchronous clutch transmission for spreading, with 10, 15 and 20 three gears for spreading

Scribing bucket: high temperature resistant material, high precision, easy to adjust the thickness of the coating, scraper structure

Heating method: liquefied petroleum gas

Marking width: 10, 12, 15, 18, 20, 30, 40, 45 (replace the marking bucket according to the working conditions)

Net weight: 110kg

FAQ                                                                                                           

1: What kind terms of payment can be accepted?

A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted

2: What certificates are available in Machinery?

A: For the certificate, we have CE, ISO,EPA(USA),CCC

3: What about the delivery time?

A: 7-20 days after receiving the deposit.

4: What about the warranty time?

A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?

A: The MOQ is 1 pcs

6.What about the service?

1). Quick response to every inquiry.

2). Professtional and detailed answer to any of customer's questions.

3). Strict QC and in time delivery.

4). Offer all relative material for customer to know and better use the machine.

5). Periodically after service follow up, offer any necessary support if needed.

6).For the new machine, within determined limits, the manufacture guarantees warranty for a period of 12 months after bought or 2000 working hours(whichever comes first).

7).The warranty includes repairation or replace the parts for free which were proved to be defective in origin by the technical department of the manufacture.

8).The repairation or replacement for the parts should not exceed the warranty period.

9).The warranty is valid on the condition of all the terms listed in the contract was observed.