Small nitrogen generator Nitrogen Generator 97%-99.999% It has a variety of uses

Small nitrogen generator Nitrogen Generator 97%-99.999% It has a variety of uses

Principle of Nitrogen Production

The nitrogen generator is based on the principle of pressure swing adsorption. S is first compressed by the air compressor to the required pressure and enters the air storage tank, so that the change of air pressure is relatively smoothly relieved to static pressure, and the compressed air is removed from the air storage tank. The large amount of liquid water and oil are then passed through the air treatment system refrigeration dryer to filter and remove the water, oil and dust in the compressed air, turning the raw air into clean and stable compressed air, and then pass the PSA pressure swing adsorption to produce nitrogen Device to produce nitrogen.

Nitrogen generator (nitrogen generator is also called nitrogen generator) uses compressed air as raw material, and uses an adsorbent called carbon molecular sieve to selectively adsorb nitrogen and oxygen to separate nitrogen in the air. The separation effect of carbon molecular sieve on nitrogen and oxygen is mainly based on the different diffusion rates of nitrogen and oxygen molecules on the surface of molecular sieve. Oxygen molecules with a smaller diameter diffuse faster and enter the solid phase of the molecular sieve more; nitrogen molecules with a larger diameter diffuse slowly and less enter the solid phase of the molecular sieve. In this way, nitrogen is enriched in the gas phase. After a period of time, the molecular sieve can absorb oxygen to a certain extent. Through decompression, the gas adsorbed by the carbon molecular sieve is released, and the molecular sieve is also regenerated. This is based on the characteristic that molecular sieve has different adsorption capacity for adsorbed gas under different pressures. Pressure swing adsorption nitrogen production equipment usually uses two parallel adsorbers, alternately performing pressure adsorption and decompression regeneration, and the operating cycle is about 2 minutes.

Model number: DM-80

Nitrogen production: 2-5 cubic meters/hour

Nitrogen purity: 99.9-99.999

Nitrogen output pressure: <0.6Mpa

Air input pressure: <0.8Mpa

Working temperature: normal temperature

Net weight: 75KG

Power rate: 220V 25W

Product size: 1500*600*550mm

Working principle: PSA pressure swing adsorption physical nitrogen production

Place of Origin: Shandong, China

FAQ                                                                                                           

1: What kind terms of payment can be accepted?

A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted

2: What certificates are available in Machinery?

A: For the certificate, we have CE, ISO,EPA(USA),CCC

3: What about the delivery time?

A: 7-20 days after receiving the deposit.

4: What about the warranty time?

A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?

A: The MOQ is 1 pcs

6.What about the service?

1). Quick response to every inquiry.

2). Professtional and detailed answer to any of customer's questions.

3). Strict QC and in time delivery.

4). Offer all relative material for customer to know and better use the machine.

5). Periodically after service follow up, offer any necessary support if needed.

6).For the new machine, within determined limits, the manufacture guarantees warranty for a period of 12 months after bought or 2000 working hours(whichever comes first).

7).The warranty includes repairation or replace the Parts for free which were proved to be defective in origin by the technical department of the manufacture.

8).The repairation or replacement for the parts should not exceed the warranty period.

9).The warranty is valid on the condition of all the terms listed in the contract was observed.