Hydraulic compactor vibration rammer for model multiple models excavator

Hydraulic compactor vibration rammer for model multiple models excavator

The excavator compactor is suitable for flat compaction, slope compaction, step compaction, groove and pit compaction and other complex foundation compaction treatments. It is used in the tamping of highway and railway subgrades such as bridge abutment back, culvert side, corner turning, road shoulder, slope protection, dam and slope protection tamping, construction trench and backfill tamping, concrete pavement repair and tamping, municipal side trenches, wellheads, pipes Side ramming, etc., used for pulling piles and crushing when necessary. It is suitable for infrastructure construction and maintenance departments such as highways, railways, ports, construction, water conservancy, and municipal administration.

Maintenance of excavator vibratory rammer:

1. Maintenance and use of eccentric iron: 1. The eccentric iron assembly must be maintained regularly. 2. During the period of vibratory rammer use, the gear oil should be replaced in time to prevent the eccentric iron assembly from being damaged and strained due to the entry of foreign matter, which will cause the cylinder and piston to wear.

2. Pipeline: When using vibratory rammer, special supporting pipeline should be used. Every time you disassemble, you must ensure that the pipeline and its joints are clean. If you do not pay attention to bringing in debris during disassembly, it will cause motor strain. Oil spill.

Tonnage:4-12(ton)

Frequency:2000(cpm)

Oil pressure:100-200(kg/cm2)

Driver oil quantity:45-150(l/pm)

Plate size:1350*900*300(mm)

Weight:450(kg)

Suitable excavator:4-16(ton)

Color: customer request

Application: Excavator accessories

Name: Excavator compactor

FAQ                                                                                                           

1: What kind terms of payment can be accepted?

A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted

2: What certificates are available in Machinery?

A: For the certificate, we have CE, ISO,EPA(USA),CCC

3: What about the delivery time?

A: 7-20 days after receiving the deposit.

4: What about the warranty time?

A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?

A: The MOQ is 1 pcs

6.What about the service?

1). Quick response to every inquiry.

2). Professtional and detailed answer to any of customer's questions.

3). Strict QC and in time delivery.

4). Offer all relative material for customer to know and better use the machine.

5). Periodically after service follow up, offer any necessary support if needed.

6).For the new machine, within determined limits, the manufacture guarantees warranty for a period of 12 months after bought or 2000 working hours(whichever comes first).

7).The warranty includes repairation or replace the Parts for free which were proved to be defective in origin by the technical department of the manufacture.

8).The repairation or replacement for the parts should not exceed the warranty period.

9).The warranty is valid on the condition of all the terms listed in the contract was observed.