Cement mixing vehicle small cement concrete mixer self-loading concrete mixer

Cement mixing vehicle small cement concrete mixer self-loading concrete mixer

Stirring speed

Fast feeding speed Low discharge residual rate

The rotation speed of the mixing tank is 612 circles per minute;

Discharge residual rate: less than 0.8 (standard requirements 3-5);

Discharge speed: greater than or equal to 2 cubic meters/minute (specified as 2.7 cubic meters/minute);

Feed rate: greater than or equal to 3.5 cubic meters/minute (specified as 2.7 cubic meters/minute).

Operation process

1. All Parts of the mechanical system should be carefully inspected before starting, and it can be started after confirming that it is good.

2. Before starting, place the mixing joystick in the "Neutral" position.

3. After starting, place the mixing joystick in the "unloading" position and remove the water in the drum.

4. When loading, the stirring lever should be placed in the "loading" position.

5. Before transportation, the unloading trough must be fixed in the "driving" position to prevent swinging.

6. When operating the joystick, you should stay in the "neutral" position for a while before moving to the next position.

Seven, do a good job in civilized construction, and the excess materials in the barrel are not allowed to fall randomly. After unloading, the mixing drum, trough, roller and other parts must be cleaned.

8. When the concrete agglomerates in the cylinder, the vehicle should be turned off, the switch key should be removed, and the outside of the cylinder should be monitored by someone outside.

Dimension(L*W*H):5000*2000*2700mm

Power:37kw

Warranty:1 Year

Feeding speed:2cubic /min

Unloading speed:1 cubic /min

Stirring drum spee:5-14r/min

Height of feeding port:2.5m

Outlet height:1 m

External dimension:5000*2000*2700mm

Front bridge:Type 130

Tyres:750-16 standard wire tyres

Steering mode:hydraulic steering

FAQ                                                                                                           

1: What kind terms of payment can be accepted?

A: For terms of payment, L/C, T/T, D/A, D/P, Western Union (can be) could accepted

2: What certificates are available in Machinery?

A: For the certificate, we have CE, ISO,EPA(USA),CCC

3: What about the delivery time?

A: 7-20 days after receiving the deposit.

4: What about the warranty time?

A: 12 months after shipment or 2000 working hours, whichever occuts first.

5. What about the Minimum Order Quantity?

A: The MOQ is 1 pcs

6.What about the service?

1). Quick response to every inquiry.

2). Professtional and detailed answer to any of customer's questions.

3). Strict QC and in time delivery.

4). Offer all relative material for customer to know and better use the machine.

5). Periodically after service follow up, offer any necessary support if needed.

6).For the new machine, within determined limits, the manufacture guarantees warranty for a period of 12 months after bought or 2000 working hours(whichever comes first).

7).The warranty includes repairation or replace the parts for free which were proved to be defective in origin by the technical department of the manufacture.

8).The repairation or replacement for the parts should not exceed the warranty period.

9).The warranty is valid on the condition of all the terms listed in the contract was observed.